Tips for Cleaning Tape Residue Traces

Sometimes, when we stick some items for too long, when we tear off the tape, it will inevitably leave some residual glue. For glue marks on hard surfaces, we can apply nail polish remover to the surface of the object, and then gently wipe it with a soft cloth to remove it. Isn't it amazing? If nail polish remover is not available, denatured alcohol can also remove these marks.

 

In addition, hand cream can also achieve the effect of removing self-adhesive, hand cream contains a lot of water (generally more than 70%), and the water contains a certain amount of surfactant. Surfactants have good wetting, penetrating, and dissolving abilities, and can quickly penetrate between the self-adhesive and the surface of the object to achieve the purpose of removal. , Washing spirit also has the same effect.

 

For the more stubborn stickers on the carpet, the best way is to carefully trim off the sticker marks on the top of the carpet pile, and wipe them off with a rag dipped in alcohol.

 

 

What are the ways to remove glue marks on tape?

 

1. Turpentine: that is, the pen was used when painting. We can use a paper towel to stick some pen cleaning liquid to wipe the place where there is offset printing, and it can be removed after a while.

 

2. Paste the old and new transparent tape: This is the principle of using the new transparent tape to glue the old transparent tape down, and this method is often very practical.

 

3. Eraser: This is a commonly used and easy method that everyone can think of. Of course, when the eraser is first used, it will become very black. You don’t have to mind this, because when the glue of the transparent tape is wiped off, it will change. white.

 

4. Expired skin care products: Because of the chemicals in them, these are useful for removing glue from scotch tape.

 

5. The mixture of soap, ammonia, and turpentine is also very effective.

 

6. Both letter sodium water and paint thinner can remove the glue of transparent tape.

 

7. Hair dryer: This method is also commonly used by people. It uses the principle of heating the glue to make it easier to fall off.

 

8. Nail polish remover can also remove the offset printing of transparent tape.

 

Production process of tape

 

1. Add raw materials:

 

The first thing to do in the tape production process is to add tape raw materials, such as acrylic.

 

2. Emulsifying tank:

 

Then, the raw material of the tape, acrylic, is added to the emulsification tank for emulsification.

 

3. Reactor:

 

After the acrylic acid is added to the emulsification tank for emulsification, it is put into the reaction pot for heating.

 

4. Glue:

 

After passing through the above tape production process steps, a finished glue product is produced.

 

5. Coating machine:

 

Place the freshly made glue on the film for gluing.

 

6. Semi-finished products:

 

The semi-finished tape produced by these tape production processes - is the mother roll.

 

7. Pipe cutting machine:

 

Use the pipe cutting machine to cut the pipe cutting process of the tape master roll that has just been made.

 

8. Slitting machine:

 

After the tape master roll is successfully cut, the tape production process is carried out by a slitting machine.

 

9. Carton:

 

After the tape master roll is cut into tubes and slits, it becomes the tape that people see on the market, and it can now be packed in cartons.

 

10. Tape:

 

The packaged tape is placed in the warehouse, which is the last tape production process, and then it can be called the finished tape.

 

For more information about Adhesive Fiberglass Mesh Tape, Fiberglass Reinforced Filament Tape, Monofilament Tape, plz feel free to contact us.